無錫市興百利機械設備有限公司

風篩式精選機 Air screen cleaner

利用空氣室風道系統的負壓吸力和網孔篩選的原理，去除糧食或種子中的枝、梗、輕雜、莖葉、癟谷、瘦小籽粒、破碎粒、土塊、石頭等雜質，主要用于小麥、水稻、玉米、可可、豆類的精選加工。

篩箱及空氣室為櫸木膠合板結構，空氣室分別由前后二套吸風道及前后二套沉降室組成，篩箱由二至六層篩網組成，篩網清理采用橡膠球撞擊式，自清篩能力強；通過選配不同規格的篩孔，可進行各種糧食及種子的精選加工。

智能自動化功能：

1、所有動力全部采用伺服電機、變頻電機，大量運用伺服、變頻、PLC、上位機等智能自動化技術，再配上各種傳感器把檢測數據上傳給觸摸屏，使設備的轉速、扭矩、溫度、振動頻率、空氣流量、空氣壓力、風門角度等參數直觀的顯示在觸摸屏，運行情況一目了然。

2、當設備調整到最佳狀態時，相關數據一鍵保存，下次加工相同種子只需一鍵恢復，對操作人員的專業技術要求低，無需憑個人經驗使用設備。

3、把手動操作步驟換成伺服電機來執行，操作人員不用跑前跑后，只需在觸摸屏上輸入相關參數來命令伺服電機，把復雜的事情變?yōu)楹唵巍?/span>

4、排雜出料口、成品出料口安裝高清攝像頭，方便管理人員在顯示器上查看調整設備后的相關情況。

5、智能自動化設備平均節能30%，降低使用成本。

6、所有的運行狀態觸摸屏全中文顯示，具有故障提示、自診斷功能。

7、軟件具有遠程升級、查看、診斷功能，方便廠家遠程服務，方便用戶管理人員。

注：以上智能配置可選，我們按需報價。

Based on the principle of negative pressure suction of air chamber air duct system and mesh screening, impurities such as branch, stem, light impurity, stem and leaf, shriveled grain, thin and small grain, broken grain, soil block and stone are removed from grain or seed, which are mainly used for the selection and processing of wheat, rice, corn, cocoa and beans.

The screen box and air chamber are made of beech plywood structure. The air chamber is composed of two sets of air suction ducts and two sets of settling chambers. The screen box is composed of two to six layers of screen mesh. The screen mesh is cleaned by rubber ball impact type, with strong self-cleaning capacity. By selecting different sizes of screen holes, various grains and seeds can be selected and processed.

Intelligent automation function:

1. Servo motor and variable-frequency motor are used for all the power. Servo, variable-frequency, PLC, upper computer and other intelligent automation technologies are widely used. In addition, various sensors are equipped to upload the detection data to the touch screen, so that the parameters such as rotating speed, torque, temperature, vibration frequency, air flow, air pressure, air door angle and so on of the equipment can be displayed on the touch screen intuitively. The operation situation is a complete picture However.

2. When the equipment is adjusted to the best state, the relevant data can be saved with one key. The next processing of the same seed only needs one key to restore. The professional and technical requirements for the operators are low, and the equipment does not need to be used by personal experience.

3. The manual operation steps are replaced by servo motor to execute. The operator does not need to run before and after, but only needs to input relevant parameters on the touch screen to command the servo motor, which makes the complex things simple.

4. HD cameras are installed at the discharge outlet and finished product outlet to facilitate the management personnel to check the relevant conditions after adjusting the equipment on the display.

5. The average energy saving of intelligent automation equipment is 30%, and the use cost is reduced.

6. All operation status touch screens are displayed in both Chinese and English, with fault prompt and self diagnosis functions.

7. The software has the function of remote upgrade, check and diagnosis, which is convenient for the remote service of the manufacturer and the user management personnel.

Note: the above intelligent configuration is optional, and we offer on demand.